|
|
Intake valves module
The intake valves module is applied for isolation and distribution of the gas flow supplied to the
compressor unit of CNG filling station equipment, and for automated gas discharge in emergency situations.
The relief valve and the shutoff valve are controlled from the automation system of the CNG filling station. The
intake valves module is fitted with a manual push-button «Emergency» switch. The
intake valves module is made in the climatic version «У» Category 1 under the National
Standard GOST 15150 for operation at the ambient air temperature range of minus 40
to plus 45°С. On request, the intake valves module may be fitted with a fiscal gas metering
unit.
Technical specifications
| Parameter |
Value |
| Max. operating pressure, MPa (kgf/cm²) |
10,0 (100) |
| Min. operating pressure, MPa (kgf/cm²) |
0,03 (0,3) |
| Max. operating flow rate, nm³/h |
5 000 |
| Min. operating flow rate, nm³/h |
100 |
| Nominal diameter of manifolds at the intake valves module, DN, mm |
50-80-100-150 |
See more details about the projects performed by the company
| |
|
|
Products
