Serial adsorption generators NITROPOWER

NITROPOWER nitrogen generator competitive edge in the current market

• Modular design. Generator capacity closely matches your needs with the expansion option. Regardless of its capacity, any NITROPOWER small-scale generator may be equipped with additional adsorbers to allow the maximum throughput at the given purity
• Reliable control system. You only have to pay for the functions you need
• Perfect assembly, high-quality overseas component parts, reliable valve system
• Serial production, opportunity for effecting delivery within the shortest possible time
• Opportunity for use of the particular generator configuration required by you. We have equipped NITROPOWER generators in accordance with the most frequent customer requests avoiding anything redundant. The configuration versions are: BASIC, STANDART, PREMIUM
• The actual linear gas velocity in NITROPOWER generator is much lower than that of its analogs. This helps to reduce adsorbent wear and considerably increase generator useful life
• NITROPOWER nitrogen generators have the lowest air flow rate per product nitrogen unit among the market counterparts — NITROPOWER nitrogen generators are the most efficient
• The specially designed pneumatic air separation diagram of a NITROPOWER nitrogen generator made it ultimately compact and convenient for installation in any premises
• Adsorbent vessels are not pressure vessels and do not require Rostekhnadzor

NITROPOWER nitrogen generator operating principle

NITROPOWER nitrogen generators utilize the PSA (Pressure Swing Adsorption) principle and incorporate steel adsorbers as the generator main part. The adsorbers are filled with a special adsorbent — carbon molecular sieves. Their characteristic feature is a significantly reduced pore diameter. Pretreated and dried compressed air is supplied into adsorbers and flows upward passing through the layer of molecular sieves. The molecular sieves are used to preferentially retain molecules of oxygen and other gases while letting through nitrogen molecules.

Before molecular sieves become oxygen-enriched, the NITROPOWER generator automatically switches the adsorbers operation mode. Now, the active adsorber switches over to the regeneration process and the air separation process starts in the other adsorber. The adsorbers switch cyclically ensuring continuous nitrogen production.

NITROPOWER nitrogen generator lineup

1. The capacity is referenced to the standard conditions (t = 20 °C, P = 760 mm Hg)
2. The air consumption is referenced to pressure of 1 MPa

NITROPOWER PLUS nitrogen generator lineup

1. The capacity is referenced to the standard conditions (t = 20 °C, P = 760 mm Hg)
2. The airconsumption is referenced to pressure of 1 MPa

Control system for NITROPOWER generators

The control system with a built-in gas analyzer board and a flow meter allows integration into the upper level control system (company’s APCS) for remote control and monitoring of all process parameters.

Depending on the options and models selected the following parameters can be monitored:

• air temperature at the generator input;
• air pressure at the generator input;
• product gas pressure at the generator output;
• oxygen concentration in the product gas at the generator output;
• pressure in the generator adsorbers;
• product gas flowrate at the nitrogen generator output (optional).

Additional options for NITROPOWER nitrogen generators:

• Air receiver
• Air compressor
• Dryer
• Nitrogen receiver
• Air filters
• Booster compressor
• Receiver hookup kit
• Generator hookup kit for compressed air feeding
• Full service maintenance during warranty and post-warranty period

Booklets and catalogues

Permit documentation